Dynamic endpoint configuration

Monitoring a server's transport adaptor endpoints

If there are one or more configured transport adaptors for a given server, you can monitor the dynamic state of a transport adaptor's endpoints on a single page.

Please note that:

To monitor endpoints, use one of the following options:

Figure. The Servers page.

You should now be able to see the following layout with a list of the configured endpoints for the given adaptor:

Figure. The Server <adaptor Name> Endpoints page.


The table shows the actual set of endpoints received from FIXEdge C++.

In the first column, the endpoint status indicator shows the dynamic status of each endpoint configured for the selected transport adaptor:

IndicatorStatusEndpoint status

Plannedthe endpoint is planned to be added to the configuration (a message cannot be sent to endpoints in the planned state)

Connecting/ Reconnectingthe endpoint is connecting

Runningthe endpoint is running

Disconnectedthe endpoint is disconnected

You can filter the list of endpoints by dynamic status by using the Status column.

Filtering

You have the ability to filter the endpoints list by using the Default Filter.

You can filter endpoints by Name and Status or a combination of them.

Endpoint Dynamic State

The Endpoint Dynamic State page contains:

All information is updated in real time.

Navigation

There are two ways to view the Endpoint Dynamic State page.

  1. From the Server <adaptor Name> Endpoints page:
    1. Click on a given endpoint in the Table view layout part
    2. The FIXICC H2 displays the Endpoint Dynamic State page in the Object info layout part
    3. Optional. To open the Endpoint Dynamic State page in a new tab, use one of the following options:
      • Click View in the tab in the Object info layout part (item 1 in the figure below)
      • Click View (Enter) in the context menu (item 2 in the figure below)
      • Double-click on the session
      • Or press Enter on your keyboard


        Figure. The Server <adaptor Name> Endpoints page.

  2. From the Notifications page:
    1. Click the desired endpoint's name


      Figure. The Notifications page with the name of the selected endpoint.

    2. FIXICC H2 opens the Endpoint Dynamic State page in a new tab:
      Figure. Endpoint Dynamic State page.