Page tree
Skip to end of metadata
Go to start of metadata

Endpoint operations

Session operations are available from the Endpoint Dynamic State page.

To go to the Endpoint Dynamic State page:

  1. Select a server from the Servers page
  2. Go from the Servers page to the  Server <adaptor Name> Endpoints page using one of the following options:
    • Clicking <adaptor Name> in the View drop-down menu on the top panel
    • Clicking the server name item in the menu on the left-side and <adaptor Name> under the server name
  3. To open the Endpoint Dynamic State page in a new tab, use one of the following options:
    • Click View on the top panel
    • Select View in the context menu
    • Double-click the session
    • Press Enter on the keyboard

The set of available operations depends on the dynamic endpoint status.

Start an endpoint

To start a configured endpoint:

  1. Make sure the endpoint displays the following status: 
  2. Click Start in either:
    • The Object info part (see below)

      Figure. Start the endpoint from the Object info layout part
      .
      or
    • The Endpoint Dynamic State page (see below)
       
      Figure. Start the endpoint from the Endpoint Dynamic State page.

  3. The FIXICC H2 displays the following confirmation form:

    Figure. Confirm the endpoint starting.

  4. To finish:
    • Click OK to complete the operation
      or
    • Click Cancel to cancel the operation

If for some reason FIXEdge can't complete this operation, FIXICC H2 displays an error form.

If the operation can't be finished, the endpoint dynamic status won't be changed.

System response

  1. FIXEdge starts the connection
  2. The endpoint changes its current dynamic status to "Running"
  3. The color indicator on FIXICC H2 turns green

Stop a session

To stop a started session:

  1. Make sure the session displays the following status: 
  2. Click Stop in either:
    • The Object info layout (see below)

      Figure. Stop the endpoint from the Object info layout part.
      or
    • The Endpoint Dynamic State page (see below)

      Figure. Stop the endpoint from the Endpoint Dynamic State page.

  3. When you click StopFIXICC H2 displays the following confirmation form:

    Figure. Confirmation form for the stop operation.

  4. Click OK to confirm the operation or Cancel to cancel the operation

If for some reason FIXEdge can't complete this operation, FIXICC H2 displays an error form.

If the operation can't be finished, the endpoint dynamic status won't be changed.

System response

  1. FIXEdge shuts the connection down
  2. The endpoint changes its current dynamic status to "Disconnected"
  3. The color indicator on FIXICC H2 turns red
  • No labels