Page tree
Skip to end of metadata
Go to start of metadata

Notifications

Table view

Event monitoring

You have the ability to monitor servers' and sessions' events on the "Notifications" page.

You can obtain quick access to the list of notifications by clicking the "Notifications" item (the "1" label in the figure below) from the left side menu bar.

Figure. Notifications.

The FIXICC H2 displays the following list of events:

  • The server has been started;
  • The server is misbehaving;
  • The server has been stopped;
  • Session has been added;
  • Session has been deleted;
  • Session status change.

The list of notifications is updated in real-time.

Filtering

You have the ability to filter the notifications list by using the Default Filter (the "2" label in the figure above).

You can filter notifications by Date, Object, Event Source, or combination of them

 Default Filter description

The Default Filter depends on the type of objects that are shown on the current page.
To use the Default Filter, type or select a value in the Default Filter fields.
You should only move the focus from the completed field or press the "Enter" key to start a search.

To reset the search results:

  • Click the "Clear" button (the "1" label in the figure above);
  • Or click the "Clear" context menu item.


Figure. Default Filter.


Figure. The "Clear" context menu item.

Then you will see the full list of rows.

As well, you can use Extended Filter (the "3" label in the figure above) for searching notification information.

 Extended Filter description

The Extended Filter allows adding custom search conditions.

Figure. The Extended Filter.

To add a new search condition, you should:

  1. Click the "Add search condition" button ("1" label in the figure above)
  2. Specify the parameter to search by (either select from the list or type the parameter name in the "Filter" field)
  3. Confirm your choice by clicking the "Select" button.

Or:

  • Cancel the operation by clicking the "Cancel" button.


Figure. The "Add condition" form.

Then select the operation type from the drop-down list according to the parameter type.

Figure. The operations list.

To start a search, click the "Refresh" button ("1" label in the figure below).

Figure. The "Refresh" button.

If you need to remove the filter condition, click the "x" symbol to see the full list of objects.

Figure. The removing condition symbol.

To reset the search results:

  • Select the "<Reset Filter>" item from the drop-down menu in the "Refresh" button.


Figure. "Reset Filter" operation.

  • Or click the "Clear" context menu item.


Figure. The "Clear" context menu item.

To save the created filter for future use:

  1. After adding the list of conditions, click the   button and select the save option
  2. You will see the save form depending on the option you have chosen
  3. Please add the mandatory information to save the filter
  4. Click the "OK" button to confirm changes

Or:

  • Cancel the operation by clicking the "Cancel" button.


Passing to an Event Source

You have the ability to pass from the "Notifications" page to the "Session Dynamic State" page by clicking the session name in the Event Source column (the "5" label in the figure above).

Then the FIXICC H2 opens the "Session Dynamic State" page in a new tab.

As well, you can pass to the "Server Sessions" page by clicking the server name in the Event Source column (the "4" label in the figure above).

The FIXICC H2 opens the "Server Sessions" page in a new tab.

Compact view

You can monitor the servers' and sessions' notifications at the dynamic pages in the compact view.

In the notifications compact view, you can see the date and time when an event happened, the event description, and the name of the event source.

Filtering

You have the ability to filter the notifications list by using the Default Filter.

You can filter notifications by Date, Object, Event Source, or combination of them.

 Default Filter description

The Default Filter depends on the type of objects that are shown on the current page.
To use the Default Filter, type or select a value in the Default Filter fields.
You should only move the focus from the completed field or press the "Enter" key to start a search.

To reset the search results:

  • Click the "Clear" button (the "1" label in the figure above);
  • Or click the "Clear" context menu item.


Figure. Default Filter.


Figure. The "Clear" context menu item.

Then you will see the full list of rows.

Figure. Compact view of the "Notifications" page.

Notification Details

You have the ability to see further information about the selected notification.

You should click on the selected notification in the "Notifications" layout part.

The FIXICC H2 opens the "Notification Details" page in the "Object info" layout part.

Figure. The "Notification Details" page in the "Object info" layout part.

You can open the "Notification Details" page by clicking the "View in tab" button in the "Object info".

Figure. The "Notification Details" page.

As well, from the "Notifications" single page and "Notifications" layout part you can open the "Notification Details" in a new tab:

  • By clicking the "View" context menu item;
  • By double-clicking on the selected notification.
  • No labels