Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

FIXICC-agent is not running after a reboot

FIXICC can't connect to fixicc-agent after the remote server reboot.

Installation of fixicc-agent on Linux prior to version FIXEdge 6.10 doesn't include enabling the fixicc-agent service. Therefore fixicc-agent doesn't start automatically on the Linux startup.

To check if the fixicc-agent process is up and running run the following command:

ps -eF | grep fixicc-agent


Enable daemon startup on the Linux boot with yajsw wrapper.daemon.update_rc property.
Open wrapper configuration file <FIXEdge Installation dir>/FIXEdge/fixicc-agent/conf/wrapper.conf and add/modify the following line there:

wrapper.daemon.update_rc = start 20 2 3 4 . start 30 5 . stop 80 0 1 6

This parameter sets the Linux runlevels and priorities for automatic startup and stop of the daemon.

Similar syntax as the update_rc.d command
It will create start links

  • at runlevels 2, 3, 4 with priority 20
  • at runlevel 5 with priority 30
  • and stop links at runlevels 0, 1, 6 with priority 80

The start the fixicc-agent daemon manually or reboot the server.

  • No labels