Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

Prerequisites and system requirements

Hardware:

Any modern Intel-based server or workstation with 64 bit CPU.

Software:

  • Windows (Windows Server 2003, Windows 7, Windows Server 2008 R2, Windows 8, Windows Server 2012);
  • unzip

Check specified ports are opened:

  • TCP: 8901, 8902, 8903.
  • UDP: 1234

Installation of FIXEdge with FIXICC

FIXEdge Components

Expected packages are located in /downloads (versions may differ):

  • FIXEdge-5.11.x.x.zip
  • engine.license
  • fixaj2-license.bin (FIXEdge prior v. 5.11.3)

Steps to install

The installation assumes that FIXEdge will be installed in C:\B2BITS directory:

  1. Create B2BITS directory
  2. Unpack FIXEdge *.zip archive
  3. Put engine.license file into FIXEdge's root dir
    Please refer to How to update license files for detailed information.
  4. Install and Start FIXICC Agent service as Administrator:

    B2BITS\FIXEdge\fixicc-agent\bat\installService.FIXEdge1.bat
    B2BITS\FIXEdge\fixicc-agent\bat\startService.FIXEdge1.bat
  5. Wait several minutes fixicc-agent service started. Check B2BITS/FIXEdge/fixicc-agent/logs/fixicc-agent.log has no errors and there are messages of agent's state at tail of the log file:
    INFO|13743/0|Service FIXICC - Agent Server|14-06-19 20:39:15|Agent is started successfully
    INFO|13743/0|Service FIXICC - Agent Server|14-06-19 20:39:15|Agent started on port: 8903
  6. Install FIXEdge service as Administrator:

    B2BITS\FIXEdge\bin\FIXEdge1.install.cmd
  7. Launch FIXICC:

    B2BITS\FIXEdge\fixicc\bin\fixicc.exe

    Please refer to FIXICC User Guide for further instructions.

  8. Create Server and use defaults parameters:
    • username: admin
    • password: admin
    • port: 8903
  9. Right Click on created server and choose 'Connect'.
  10. Status change color from red to purple. 
  11. Right Click on created server and choose 'Start server'.
  12. Status change color from purple to green. 

Installation complete.

  • No labels